Home > PTFE Hose Assemblies
Choose a sub category:
Straight to Straight Straight to 45 Degree Straight to 90 Degree
Straight to Banjo Custom Nitrous Hoses
Sort By:
Page of 6
#3 stainless steel braided brake hoses that will fit any brake application for cars and motorcycles #4 stainless steel braided brake hoses that will fit any brake line application for cars and motorcycles #6 stainless steel braided brake hoses that will fit any brake line application for cars and motorcycles
300-03-CUSTOM
Our Price: $3.00

(1)
300-04-Custom
Our Price: $4.00
300-06-Custom
Our Price: $5.00
#3 Stainless Steel Braided Hose - Designed to fit every motorcycle in the market today. These fittings and lines can be used in any brake line application.
To order your own custom line:
1.) Choose one of 8 steel fittings, shown in the above picture, for each end in the pulldown menu at checkout.
2.) Specify the length of dash 3 hose you desire in the pulldown menu at checkout.
3.) Specify the clocking (fitting positions in relationship to each other) you desire in the pulldown menu at checkout
4.) Choose the color PVC hose covering you desire in the pulldown menu at checkout.

Bolts and washers are not included.
NO RETURNS or REFUNDS on custom assemblies.

Note: To insure the proper hose length; measure along the route you want your line to run using a lightweight wire. Plan your line route so that the lines will not get pinched. The length of the hose should be measured from the outside edge of one fitting to the outside edge of the other, as shown in diagram.

Clocking: Using fixed fittings where the installation requires elbow fittings on both ends you need to calculate the degree of angle in the relationship of the two fittings, known as clocking. To do so lay out your assembly horizontally and flat on a table with your left hand on the first end with the banjo flat at 0° position, looking down on the assembly measure the angle counter-clockwise of the fitting position in relationship to the fitting on the other end.
Note: If you are unsure of the clocking email us a photo or mail us a sample of the line you want to duplicate. No Returns or Refunds on custom lines. For further instruction please see diagram in our technical section.
#4 Stainless Steel Braided Hose - Designed to fit every motorcycle in the market today. These fittings and lines can be used in any brake line application.
To order your own custom line:
1.) Choose one of 8 steel fittings, shown in the above picture, for each end in the pulldown menu at checkout.
2.) Specify the length of dash 4 hose you desire in the pulldown menu at checkout.
3.) Specify the clocking (fitting positions in relationship to each other) you desire in the pulldown menu at checkout
4.) Choose the color PVC hose covering you desire in the pulldown menu at checkout.

Bolts and washers are not included.
NO RETURNS or REFUNDS on custom assemblies.

Note: To insure the proper hose length; measure along the route you want your line to run using a lightweight wire. Plan your line route so that the lines will not get pinched. The length of the hose should be measured from the outside edge of one fitting to the outside edge of the other, as shown in diagram.

Clocking: Using fixed fittings where the installation requires elbow fittings on both ends you need to calculate the degree of angle in the relationship of the two fittings, known as clocking. To do so lay out your assembly horizontally and flat on a table with your left hand on the first end with the banjo flat at 0° position, looking down on the assembly measure the angle counter-clockwise of the fitting position in relationship to the fitting on the other end.
Note: If you are unsure of the clocking email us a photo or mail us a sample of the line you want to duplicate. No Returns or Refunds on custom lines. For further instruction please see diagram in our technical section.
#6 Stainless Steel Braided Hose - Designed to fit every motorcycle in the market today. These fittings and lines can be used in any brake line application.
To order your own custom line:
1.) Choose one of 5 steel fittings, shown in the above picture, for each end in the pulldown menu at checkout.
2.) Specify the length of dash 6 hose you desire in the pulldown menu at checkout.
3.) Specify the clocking (fitting positions in relationship to each other) you desire in the pulldown menu at checkout
4.) Choose the color PVC hose covering you desire in the pulldown menu at checkout.

Bolts and washers are not included.
NO RETURNS or REFUNDS on custom assemblies.

Note: To insure the proper hose length; measure along the route you want your line to run using a lightweight wire. Plan your line route so that the lines will not get pinched. The length of the hose should be measured from the outside edge of one fitting to the outside edge of the other, as shown in diagram.

Clocking: Using fixed fittings where the installation requires elbow fittings on both ends you need to calculate the degree of angle in the relationship of the two fittings, known as clocking. To do so lay out your assembly horizontally and flat on a table with your left hand on the first end with the banjo flat at 0° position, looking down on the assembly measure the angle counter-clockwise of the fitting position in relationship to the fitting on the other end.
Note: If you are unsure of the clocking email us a photo or mail us a sample of the line you want to duplicate. No Returns or Refunds on custom lines. For further instruction please see diagram in our technical section.
PTFE hose assembly -3 female straight to straight 10 inches long PTFE hose assembly -3 female straight to straight 12 inches long PTFE HOSE ASSEMBLY -3 FEMALE STRAIGHT TO 1/8 NPT MALE 12INCHES LONG WITH BLUE B-NUT
610310
Our Price: $12.00
610312
Our Price: $13.00
610312-18DB
Our Price: $15.00
PTFE HOSE ASSEMBLY -3 FEMALE STRAIGHT TO STRAIGHT 10 INCHES LONG PTFE HOSE ASSEMBLY -3 FEMALE STRAIGHT TO STRAIGHT 12 INCHES LONG PTFE HOSE ASSEMBLY -3 FEMALE STRAIGHT TO 1/8 NPT MALE 12INCHES LONG WITH BLUE B-NUT
PTFE HOSE ASSEMBLY -3 FEMALE STRAIGHT TO 1/8 NPT MALE 12INCHES LONG WITH RED B-NUT PTFE HOSE ASSEMBLY -3 FEMALE STRAIGHT TO STRAIGHT 12INCHES LONG WITH BLUE B-NUTS PTFE HOSE ASSEMBLY -3 FEMALE STRAIGHT TO STRAIGHT 12INCHES LONG WITH RED B-NUTS
610312-18DR
Our Price: $15.00
610312DB
Our Price: $15.00
610312DR
Our Price: $15.00
PTFE HOSE ASSEMBLY -3 FEMALE STRAIGHT TO 1/8 NPT MALE 12INCHES LONG WITH RED B-NUT PTFE HOSE ASSEMBLY -3 FEMALE STRAIGHT TO STRAIGHT 12INCHES LONG WITH BLUE B-NUTS PTFE HOSE ASSEMBLY -3 FEMALE STRAIGHT TO STRAIGHT 12INCHES LONG WITH RED B-NUTS
PTFE hose assembly -3 female straight to straight 14 inches long PTFE hose assembly -3 female straight to straight 15 inches long PTFE hose assembly -3 female straight to straight 16 inches long
610314
Our Price: $14.00
610315
Our Price: $14.50
610316
Our Price: $15.00
PTFE HOSE ASSEMBLY -3 FEMALE STRAIGHT TO STRAIGHT 14 INCHES LONG PTFE HOSE ASSEMBLY -3 FEMALE STRAIGHT TO STRAIGHT 15 INCHES LONG PTFE HOSE ASSEMBLY -3 FEMALE STRAIGHT TO STRAIGHT 16 INCHES LONG
PTFE hose assembly -3 female straight to straight 18 inches long PTFE HOSE ASSEMBLY -3 FEMALE STRAIGHT TO 1/8 NPT MALE 18INCHES LONG WITH BLUE B-NUTS PTFE HOSE ASSEMBLY -3 FEMALE STRAIGHT TO 1/8 NPT MALE 18INCHES LONG WITH RED B-NUTS
610318
Our Price: $16.00
610318-18DB
Our Price: $16.00
610318-18DR
Our Price: $16.00
PTFE HOSE ASSEMBLY -3 FEMALE STRAIGHT TO STRAIGHT 18 INCHES LONG PTFE HOSE ASSEMBLY -3 FEMALE STRAIGHT TO 1/8 NPT MALE 18INCHES LONG WITH BLUE B-NUTS PTFE HOSE ASSEMBLY -3 FEMALE STRAIGHT TO 1/8 NPT MALE 18INCHES LONG WITH RED B-NUTS
PTFE HOSE ASSEMBLY -3 FEMALE STRAIGHT TO STRAIGHT 18INCHES LONG WITH BLUE B-NUTS PTFE HOSE ASSEMBLY -3 FEMALE STRAIGHT TO STRAIGHT 18INCHES LONG WITH RED B-NUTS PTFE hose assembly -3 female straight to straight 20 inches long
610318DB
Our Price: $16.00
610318DR
Our Price: $16.00
610320
Our Price: $17.00
PTFE HOSE ASSEMBLY -3 FEMALE STRAIGHT TO STRAIGHT 18INCHES LONG WITH BLUE B-NUTS PTFE HOSE ASSEMBLY -3 FEMALE STRAIGHT TO STRAIGHT 18INCHES LONG WITH RED B-NUTS PTFE HOSE ASSEMBLY -3 FEMALE STRAIGHT TO STRAIGHT 20 INCHES LONG
PTFE hose assembly -3 female straight to straight 21 inches long PTFE hose assembly -3 female straight to straight 22 inches long PTFE hose assembly -3 female straight to straight 24 inches long
610321
Our Price: $17.50
610322
Our Price: $18.00
610324
Our Price: $19.00
PTFE HOSE ASSEMBLY -3 FEMALE STRAIGHT TO STRAIGHT 21 INCHES LONG PTFE HOSE ASSEMBLY -3 FEMALE STRAIGHT TO STRAIGHT 22 INCHES LONG PTFE HOSE ASSEMBLY -3 FEMALE STRAIGHT TO STRAIGHT 24 INCHES LONG
PTFE HOSE ASSEMBLY -3 FEMALE STRAIGHT TO 1/8 NPT MALE 24INCHES LONG WITH BLUE B-NUTS PTFE HOSE ASSEMBLY -3 FEMALE STRAIGHT TO 1/8 NPT MALE 24INCHES LONG WITH RED B-NUTS PTFE HOSE ASSEMBLY -3 FEMALE STRAIGHT TO STRAIGHT 24INCHES LONG WITH BLUE B-NUTS
610324-18DB
Our Price: $17.00
610324-18DR
Our Price: $17.00
610324DB
Our Price: $17.00
PTFE HOSE ASSEMBLY -3 FEMALE STRAIGHT TO 1/8 NPT MALE 24INCHES LONG WITH BLUE B-NUTS PTFE HOSE ASSEMBLY -3 FEMALE STRAIGHT TO 1/8 NPT MALE 24INCHES LONG WITH RED B-NUTS PTFE HOSE ASSEMBLY -3 FEMALE STRAIGHT TO STRAIGHT 24INCHES LONG WITH BLUE B-NUTS
PTFE HOSE ASSEMBLY -3 FEMALE STRAIGHT TO STRAIGHT 24INCHES LONG WITH RED B-NUTS PTFE hose assembly -3 female straight to straight 26 inches long PTFE hose assembly -3 female straight to straight 28 inches long
610324DR
Our Price: $17.00
610326
Our Price: $20.00
610328
Our Price: $22.00
PTFE HOSE ASSEMBLY -3 FEMALE STRAIGHT TO STRAIGHT 24INCHES LONG WITH RED B-NUTS PTFE HOSE ASSEMBLY -3 FEMALE STRAIGHT TO STRAIGHT 26 INCHES LONG PTFE HOSE ASSEMBLY -3 FEMALE STRAIGHT TO STRAIGHT 28 INCHES LONG
PTFE hose assembly -3 female straight to straight 30 inches long PTFE hose assembly -4 female straight to straight 10 inches long PTFE hose assembly -4 female straight to straight 12 inches long
610330
Our Price: $24.00
610410
Our Price: $12.00
610412
Our Price: $13.00
PTFE HOSE ASSEMBLY -3 FEMALE STRAIGHT TO STRAIGHT 30 INCHES LONG PTFE HOSE ASSEMBLY -4 FEMALE STRAIGHT TO STRAIGHT 10 INCHES LONG PTFE HOSE ASSEMBLY -4 FEMALE STRAIGHT TO STRAIGHT 12 INCHES LONG